config.ini

# Configuration settings for:
# Linux Drivers for Huion Kamvas Tablets
# at github.com/joseluis/huion-linux-drivers
#
#  1 Main Configuration
#  2 Buttons Menus
#  3 Monitor Setups
#  4 Supported Tablets


#
# 1 MAIN CONFIGURATION:
# -----------------------------------------------------------------------------

[config]

# Your tablet. Find the supported models at the end of this file.
# Or use [tablet_debug] for just printing input info for sharing.
current_tablet = [tablet_gt221pro]
# current_tablet = [tablet_h320m] # Tablet HUION h320m

# Configure buttons
enable_buttons          = true
pen_buttons_reverse     = false

# Configure scrollbar
enable_scrollbar        = true
scrollbar_reverse       = false

# Multi Monitor Configuration
enable_multi_monitor    = false
enable_xrandr           = false
current_monitor_setup   = [monitor_2]

# Calibration Data
enable_calibration      = false
calibrate_min_x         = 250
calibrate_max_x         = 95250
calibrate_min_y         = 300
calibrate_max_y         = 53400

# Notifications
enable_notifications    = true
buttons_notifications   = true
scrollbar_notifications = false

# Miscellaneus
uclogic_bins            = /usr/local/bin
refresh_rate_fps        = 300

debug_mode              = true

# Here you can select a menu with the appropriate number of buttons for your tablet. E.g.:
#start_menu              = [menu_simple_4b]
#start_menu              = [menu_main_10b]
#start_menu              = [menu_simple_11b] # Tablet HUION h320m
start_menu              =


#
# 2 BUTTONS MENUS:
# -----------------------------------------------------------------------------


[menu_simple_4b]
b0 = key Tab           # hide interface
b1 = key r             # rect select (gimp) & pick layer (krita)
b2 = key ctrl+z        # undo
b3 = key ctrl+y        # redo (gimp)
#
# scrollbar (up/down)
su = key ctrl+minus    # zoom out (krita)
sd = key ctrl+plus     # zoom in (krita)


[menu_simple_10b]
# upper buttons
b0 = key Tab           # hide interface
b1 = key r             # rect select (gimp) & pick layer (krita)
b2 = key ctrl+x        # cut
b3 = key ctrl+c        # copy
b4 = key ctrl+v        # paste
#
# scrollbar (up/down)
su = key ctrl+minus    # zoom out (krita)
sd = key ctrl+plus     # zoom in (krita)
#
# lower buttons
b5 = key ctrl+z        # undo
b6 = key ctrl+y        # redo (gimp)
b7 = key ctrl+shift+z  # redo (krita)
b8 = key 4             # turn left (krita)
b9 = key 6             # turn right (krita)


[menu_simple_14b]
# upper buttons
b0 = key Tab           # hide interface
b1 = key r             # rect select (gimp) & pick layer (krita)
b2 = key ctrl+x        # cut
b3 = key ctrl+c        # copy
b4 = key ctrl+v        # paste
b5 = key ctrl+z        # undo
b6 = key ctrl+y        # redo (gimp)
b7 = key ctrl+shift+z  # redo (krita)
#
# scrollbar (up/down)
su = key ctrl+minus    # zoom out (krita)
sd = key ctrl+plus     # zoom in (krita)
#
# lower buttons
b8  = key 4            # turn left (krita)
b9  = key 6            # turn right (krita)
b10 =
b11 =
b12 =
b13 =
b14 =


# Main menu that links to other sub-menus (DEFAULT MENU) (10 buttons)
[menu_main_10b]
title = % Main Menu %
b0 = [menu_krita]
b1 = [menu_gimp]
b2 = [menu_darktable]
b3 =
b4 =
#
su = click 4           # mouse wheel up
sd = click 5           # mouse wheel down
#
b5 = [menu_vlc]
b6 =
b7 = key Escape
b8 = key Return
b9 = [menu_main]


[menu_krita]
# https://defkey.com/krita-shortcuts
title = % Krita %
b0 = [menu_krita_draw]
b1 = [menu_krita_edit]
b2 =
b3 = key Insert        # new paint layer
b4 = key F5            # export
#
su = key ctrl+minus    # zoom out
sd = key ctrl+plus     # zoom in
#
b5 = key ctrl+alt+s    # save incremental
b6 = key ctrl+s        # save
b7 = key ctrl+w        # close
b8 = key ctrl+o        # open
b9 = [menu_main]


[menu_krita_draw]
title = % Krita - DRAW %
b0 = key Tab           # hide interface
b1 = key b             # draw tool
b2 = key p             # select color
b3 = key ctrl+g        # new group
b4 = key e             # erase mode
#
su = key ctrl+minus    # zoom out
sd = key ctrl+plus     # zoom in
#
b5 = key ctrl+z        # undo
b6 = key ctrl+shift+z  # redo
b7 = key 4             # rotate left
b8 = key 6             # rotate right
b9 = [menu_krita]


[menu_krita_edit]
title = % Krita - EDIT %
b0 = key Tab           # hide interface
b1 =
b2 = key ctrl+r        # select square
b3 =
b4 =
#
su = key ctrl+minus    # zoom out
sd = key ctrl+plus     # zoom in
#
b5 = key ctrl+x        # cut
b6 = key ctrl+c        # copy
b7 = key ctrl+alt+c    # copy merged
b8 = key ctrl+v        # paste
b9 = [menu_krita]


[menu_gimp]
# http://www.gimpusers.com/gimp/hotkeys
title = % Gimp %
b0 = key Tab           # hide interface
b1 = key p             # paintbrush
b2 = key r             # rect select
b3 = key c             # clone
b4 = key shift+e       # eraser
#
su = key minus         # zoom out
sd = key plus          # zoom in
#
b5 = key ctrl+z        # undo
b6 = key ctrl+y        # redo
b7 = key x             # swap colors
b8 = key shift+r       # rotate
b9 = [menu_main]


[menu_darktable]
# https://www.darktable.org/usermanual/en/shortcuts.html
title = % DarkTable %
b0 = key Tab           # toggle side borders
b1 = key ctrl+h        # toggle header
b2 =
b3 = key ctrl+e        # export
b4 = key period        # switch view
#
su = key alt+3         # zoom out
sd = key alt+2         # zoom in
#
b5 = key ctrl+z        # undo
b6 = key ctrl+y        # redo
b7 = key Return        # image operations/clipping/commit
b8 = key Escape
b9 = [menu_main]


[menu_vlc]
# http://www.vlcshortcuts.com/
title = % VLC  %
b0 = key f            # fullscreen
b1 = key space        # play / pause
b2 = key ctrl+Left    # 60s rewind (1m)
b3 = key alt+Left     # 10s rewind
b4 = key shift+Left   # 3s rewind
#
su = key ctrl+Up      # volume up
sd = key ctrl+Down    # volume down
#
b5 = key shift+Right  # 3s forward
b6 = key alt+Right    # 10s forward
b7 = key ctrl+Right   # 60s forward (1m)
b8 = key ctrl+s       # save screenshot
b9 = [menu_main]

[menu_simple_11b]
# upper buttons
b0 = key Tab
b1 = key ctrl+s
b2 = key ctrl+r

b3 = key plus  # up
b4 = key minus  # down
b5 = key Return  # center
b6 = key ctrl+z  # left
b7 = key ctrl+y  # right

b8 = key ctrl+c
b9 = key ctrl+x
b10 = key ctrl+v


#
# 3 MONITOR SETUPS
# -----------------------------------------------------------------------------


[monitor_1]
# The tablet is the only monitor
screen_1W = 1920
screen_1H = 1080

# global geometry
total_screen_width   = ${screen_1W}
total_screen_height  = ${screen_1H}
tablet_offset_x      = 0
tablet_offset_y      = 0

xrandr_output1 = --output HDMI-1 --mode ${screen_1W}x${screen_1H} --pos 0x0 --rotate normal
xrandr_args    = ${xrandr_output1}


[monitor_1+1]
# 2 full HD monitors sharing the same view
screen_1W = 1920
screen_1H = 1080
screen_2W = 1920
screen_2H = 1080

# global geometry
total_screen_width   = ${screen_1W}
total_screen_height  = ${screen_1H}
tablet_offset_x      = 0
tablet_offset_y      = 0

xrandr_output1 = --output DVI-D-1 --mode ${screen_1W}x${screen_1H} --pos 0x0 --rotate normal
xrandr_output2 = --output VGA-1 --mode ${screen_2W}x${screen_2H} --pos 0x0 --rotate normal
xrandr_args    = ${xrandr_output1} ${xrandr_output2}


[monitor_2]
# 2 monitors arranged horizontally

# screens widths and heights
screen_1W = 2560
screen_1H = 1440
screen_2W = 1920
screen_2H = 1080

# global geometry
total_screen_width   = ${screen_1W} + ${screen_2W}
total_screen_height  = ${screen_1H}
tablet_offset_x      = ${screen_1W}
tablet_offset_y      = 0

xrandr_output1 = --output HDMI-1 --mode ${screen_1W}x${screen_1H} --pos 0x0 --rotate normal
xrandr_output2 = --output DVI-D-1 --mode ${screen_2W}x${screen_2H} --pos ${screen_1W}x0 --rotate normal
xrandr_args    = ${xrandr_output1} ${xrandr_output2}


[monitor_3]
# 3 monitors arranged horizontally

# screens widths and heights
screen_1W = 2560
screen_1H = 1440
screen_2W = 1920
screen_2H = 1080
screen_3W = 1920
screen_3H = 1080

# global geometry
total_screen_width   = ${screen_1W} + ${screen_2W} + ${screen_3W}
total_screen_height  = ${screen_1H}
tablet_offset_x      = ${screen_1W} + ${screen_2W}
tablet_offset_y      = 0

xrandr_output1 = --output HDMI-1 --mode ${screen_1W}x${screen_1H} --pos 0x0 --rotate normal
xrandr_output2 = --output DVI-D-1 --mode ${screen_2W}x${screen_2H} --pos ${screen_1W}x0 --rotate normal
xrandr_output3 = --output VGA-1 --mode ${screen_3W}x${screen_3H} --pos 4480x0 --rotate normal
xrandr_args    = ${xrandr_output1} ${xrandr_output2} ${xrandr_output3}


[monitor_2+1]
# 3 monitors. But 2 and 3 share the same view

screen_1W = 2560
screen_1H = 1440
screen_2W = 1920
screen_2H = 1080
screen_3W = 1920
screen_3H = 1080

total_screen_width   = ${screen_1W} + ${screen_2W}
total_screen_height  = ${screen_1H}
tablet_offset_x      = ${screen_1W}
tablet_offset_y      = 0

xrandr_output1 = --output HDMI-1 --mode ${screen_1W}x${screen_1H} --pos 0x0 --rotate normal
xrandr_output2 = --output DVI-D-1 --mode ${screen_2W}x${screen_2H} --pos ${screen_1W}x0 --rotate normal
xrandr_output3 = --output VGA-1 --mode ${screen_3W}x${screen_3H} --pos ${screen_1W}x0 --rotate normal
xrandr_args    = ${xrandr_output1} ${xrandr_output2} ${xrandr_output3}


#
# 4 SUPPORTED TABLETS:
# -----------------------------------------------------------------------------

[tablet_1060plus]
model_name = 1060 PLUS
pen_max_x = 50800
pen_max_y = 31750
pen_max_z = 8191
resolution = 5080
buttons = 12

[tablet_1060pro]
model_name    = 1060 PRO
pen_max_x     = 40000
pen_max_y     = 25000
pen_max_z     = 2047
resolution    = 4000
buttons       = 12

[tablet_dwh69]
model_name    = DWH69
pen_max_x     = 36000
pen_max_y     = 22500
pen_max_z     = 2047
resolution    = 5080
buttons       = 8

[tablet_gt116]
model_name    = GT-116
screen        = true
screen_width  = 1920
screen_height = 1080
pen_max_x     = 53580
pen_max_y     = 33640
pen_max_z     = 8191
resolution    = 5080
buttons       = 4
scrollbar     = 1

[tablet_gt133]
model_name    = GT-133
screen        = true
screen_width  = 1920
screen_height = 1080
pen_max_x     = 58752
pen_max_y     = 33048
pen_max_z     = 8191
resolution    = 5080
buttons       = 5
scrollbar     = 1

# Huion Kamvas Pro 16
[tablet_gt156]
model_name    = GT-156
screen        = true
screen_width  = 1920
screen_height = 1080
pen_max_x     = 68840
pen_max_y     = 38720
pen_max_z     = 8191
resolution    = 5080
buttons       = 8
scrollbar     = 1

[tablet_gt156v2]
model_name    = GT-156 v2
screen        = true
screen_width  = 1920
screen_height = 1080
pen_max_x     = 68834
pen_max_y     = 38710
pen_max_z     = 8191
resolution    = 5080
buttons       = 14
scrollbar     = 1

[tablet_gt185]
model_name    = GT-185
screen        = true
screen_width  = 1366
screen_height = 768
pen_max_x     = 64400
pen_max_y     = 36240
pen_max_z     = 2047
resolution    = 4000
buttons       = 8

[tablet_gt191]
model_name    = GT-191
screen        = true
screen_width  = 1920
screen_height = 1080
pen_max_x     = 86970
pen_max_y     = 47752
pen_max_z     = 8191
resolution    = 5080

[tablet_gt220v2]
model_name    = GT-220 v2
screen        = true
screen_width  = 1920
screen_height = 1080
pen_max_x     = 95352
pen_max_y     = 53645
pen_max_z     = 8191
resolution    = 5080

[tablet_gt221pro]
model_name    = GT-221 PRO
screen        = true
screen_width  = 1920
screen_height = 1080
pen_max_x     = 95352
pen_max_y     = 53645
pen_max_z     = 8191
resolution    = 5080
buttons       = 10
scrollbar     = 1

[tablet_h950p]
model_name    = H950P
pen_max_x     = 44200
pen_max_y     = 27600
pen_max_z     = 8191
resolution    = 5080
buttons       = 8

[tablet_h430p]
model_name    = H430P
pen_max_x     = 24384
pen_max_y     = 15240
pen_max_z     = 8191
resolution    = 5080
buttons       = 4

[tablet_hs64]
model_name    = HS64
pen_max_x     = 32000
pen_max_y     = 20400
pen_max_z     = 8191
resolution    = 5080
buttons       = 4

[tablet_h320m] # 256c:006d
model_name    = H320M
pen_max_x     = 44200
pen_max_y     = 27600
pen_max_z     = 8191
resolution    = 5080
buttons       = 11

# You can use this tablet to show the technical input information
[tablet_debug]
model_name    = DEBUG TABLET
debug_only    = true



# PLEASE SEND THE INFORMATION FROM YOUR TABLET
# ------------------------------------------------------------------------------
; If you have access to a Huion model that is not present in the latest
; [config.ini][1] file, or that doesn't work correctly, please
; [open an issue][2] and send the console output.
;
; [1]: https://github.com/joseluis/huion-linux-drivers/blob/master/config.ini
; [2]: https://github.com/joseluis/huion-linux-drivers/issues/new
;
; Make sure you have:
;   1. configured the option: current_table = [tablet_debug]
;   2. touched each corner of the screen as the script instructs
;
; So that the output is similar to the following example:
;
; ```
; Finding USB device. . . Done!
; Reading configuration. . . Done!
; Preparing driver. . . Done!
; --------------------------------------------------------------------------------
;     |                Product: Tablet Monitor
;  64 |        Params block #1: ??????
;     |                          Max X: 37540
;     |                          Max Y: 21120
;     |                   Max pressure: 8191
;     |                     Resolution: 2000
;     |
;  79 |         Internal model:
;  7b |         Buttons status: HK On
;  c8 |        Params block #2: ????????
;     |                          Max X: 95352
;     |                          Max Y: 53645
;     |                   Max pressure: 8191
;     |                     Resolution: 5080
;     |
;  c9 |       Firmware version: HUION_M167_170623
;  ca |  Internal manufacturer: HUION Animation Technology Co.,ltd
; --------------------------------------------------------------------------------
; Setting up driver. . . Done!
;     Tablet model name         DEBUG TABLET
;     Buttons                   disabled (0)
;     Scrollbar                 disabled (0)
;     Notifications:            ENABLED
;           for buttons         ENABLED
;           for scrollbar       disabled
;   Screen                      disabled
;
; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
;             < DEBUG MODE ENABLED >
;     [Debug mode only]. Input from tablet wont be used, except
;     for printing out the information to the console.
;
;     INSTRUCTIONS: briefly touch the four corners of the screen:
;         1) Left up 2) Right up 3) Left Down 4) Right Down
; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
;
; Huion Kamvas driver should now be running
;
; Input from the tablet will be printed out