diff --git a/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/ISSUE_TEMPLATE.md b/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/ISSUE_TEMPLATE.md deleted file mode 100644 index f0e26146f..000000000 --- a/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/ISSUE_TEMPLATE.md +++ /dev/null @@ -1,46 +0,0 @@ -Thank you for opening an issue on an Adafruit Arduino library repository. To -improve the speed of resolution please review the following guidelines and -common troubleshooting steps below before creating the issue: - -- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use - the forums at http://forums.adafruit.com to ask questions and troubleshoot why - something isn't working as expected. In many cases the problem is a common issue - that you will more quickly receive help from the forum community. GitHub issues - are meant for known defects in the code. If you don't know if there is a defect - in the code then start with troubleshooting on the forum first. - -- **If following a tutorial or guide be sure you didn't miss a step.** Carefully - check all of the steps and commands to run have been followed. Consult the - forum if you're unsure or have questions about steps in a guide/tutorial. - -- **For Arduino projects check these very common issues to ensure they don't apply**: - - - For uploading sketches or communicating with the board make sure you're using - a **USB data cable** and **not** a **USB charge-only cable**. It is sometimes - very hard to tell the difference between a data and charge cable! Try using the - cable with other devices or swapping to another cable to confirm it is not - the problem. - - - **Be sure you are supplying adequate power to the board.** Check the specs of - your board and plug in an external power supply. In many cases just - plugging a board into your computer is not enough to power it and other - peripherals. - - - **Double check all soldering joints and connections.** Flakey connections - cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints. - - - **Ensure you are using an official Arduino or Adafruit board.** We can't - guarantee a clone board will have the same functionality and work as expected - with this code and don't support them. - -If you're sure this issue is a defect in the code and checked the steps above -please fill in the following fields to provide enough troubleshooting information. -You may delete the guideline and text above to just leave the following details: - -- Arduino board: **INSERT ARDUINO BOARD NAME/TYPE HERE** - -- Arduino IDE version (found in Arduino -> About Arduino menu): **INSERT ARDUINO - VERSION HERE** - -- List the steps to reproduce the problem below (if possible attach a sketch or - copy the sketch code in too): **LIST REPRO STEPS BELOW** diff --git a/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/PULL_REQUEST_TEMPLATE.md b/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/PULL_REQUEST_TEMPLATE.md deleted file mode 100644 index 7b641eb86..000000000 --- a/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/PULL_REQUEST_TEMPLATE.md +++ /dev/null @@ -1,26 +0,0 @@ -Thank you for creating a pull request to contribute to Adafruit's GitHub code! -Before you open the request please review the following guidelines and tips to -help it be more easily integrated: - -- **Describe the scope of your change--i.e. what the change does and what parts - of the code were modified.** This will help us understand any risks of integrating - the code. - -- **Describe any known limitations with your change.** For example if the change - doesn't apply to a supported platform of the library please mention it. - -- **Please run any tests or examples that can exercise your modified code.** We - strive to not break users of the code and running tests/examples helps with this - process. - -Thank you again for contributing! We will try to test and integrate the change -as soon as we can, but be aware we have many GitHub repositories to manage and -can't immediately respond to every request. There is no need to bump or check in -on a pull request (it will clutter the discussion of the request). - -Also don't be worried if the request is closed or not integrated--sometimes the -priorities of Adafruit's GitHub code (education, ease of use) might not match the -priorities of the pull request. Don't fret, the open source community thrives on -forks and GitHub makes it easy to keep your changes in a forked repo. - -After reviewing the guidelines above you can delete this text from the pull request. diff --git a/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/workflows/githubci.yml b/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/workflows/githubci.yml deleted file mode 100644 index fcd3f724c..000000000 --- a/MEMENTO/Memento_Face_Detect_Recognize/memento_platformio_camera/lib/Adafruit_PyCamera/.github/workflows/githubci.yml +++ /dev/null @@ -1,44 +0,0 @@ -name: Arduino Library CI - -on: [pull_request, push, repository_dispatch] - -jobs: - build: - runs-on: ubuntu-latest - - steps: - - uses: actions/setup-python@v4 - with: - python-version: '3.x' - - uses: actions/checkout@v3 - - uses: actions/checkout@v3 - with: - repository: adafruit/ci-arduino - path: ci - - - name: pre-install - run: bash ci/actions_install.sh - - - name: test platforms - run: python3 ci/build_platform.py "pycamera_s3" - - - name: list - run: | - ls - ls examples/*/build/ - - - name: Upload build artifacts - uses: actions/upload-artifact@v3 - with: - name: example_uf2s - path: | - examples/*/build/*/*.uf2 - - - name: clang - run: python3 ci/run-clang-format.py -e "ci/*" -e "bin/*" -r . - - - name: doxygen - env: - GH_REPO_TOKEN: ${{ secrets.GH_REPO_TOKEN }} - PRETTYNAME : "Adafruit PyCamera Library" - run: bash ci/doxy_gen_and_deploy.sh diff --git a/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/ISSUE_TEMPLATE.md b/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/ISSUE_TEMPLATE.md deleted file mode 100644 index f0e26146f..000000000 --- a/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/ISSUE_TEMPLATE.md +++ /dev/null @@ -1,46 +0,0 @@ -Thank you for opening an issue on an Adafruit Arduino library repository. To -improve the speed of resolution please review the following guidelines and -common troubleshooting steps below before creating the issue: - -- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use - the forums at http://forums.adafruit.com to ask questions and troubleshoot why - something isn't working as expected. In many cases the problem is a common issue - that you will more quickly receive help from the forum community. GitHub issues - are meant for known defects in the code. If you don't know if there is a defect - in the code then start with troubleshooting on the forum first. - -- **If following a tutorial or guide be sure you didn't miss a step.** Carefully - check all of the steps and commands to run have been followed. Consult the - forum if you're unsure or have questions about steps in a guide/tutorial. - -- **For Arduino projects check these very common issues to ensure they don't apply**: - - - For uploading sketches or communicating with the board make sure you're using - a **USB data cable** and **not** a **USB charge-only cable**. It is sometimes - very hard to tell the difference between a data and charge cable! Try using the - cable with other devices or swapping to another cable to confirm it is not - the problem. - - - **Be sure you are supplying adequate power to the board.** Check the specs of - your board and plug in an external power supply. In many cases just - plugging a board into your computer is not enough to power it and other - peripherals. - - - **Double check all soldering joints and connections.** Flakey connections - cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints. - - - **Ensure you are using an official Arduino or Adafruit board.** We can't - guarantee a clone board will have the same functionality and work as expected - with this code and don't support them. - -If you're sure this issue is a defect in the code and checked the steps above -please fill in the following fields to provide enough troubleshooting information. -You may delete the guideline and text above to just leave the following details: - -- Arduino board: **INSERT ARDUINO BOARD NAME/TYPE HERE** - -- Arduino IDE version (found in Arduino -> About Arduino menu): **INSERT ARDUINO - VERSION HERE** - -- List the steps to reproduce the problem below (if possible attach a sketch or - copy the sketch code in too): **LIST REPRO STEPS BELOW** diff --git a/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/PULL_REQUEST_TEMPLATE.md b/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/PULL_REQUEST_TEMPLATE.md deleted file mode 100644 index 7b641eb86..000000000 --- a/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/PULL_REQUEST_TEMPLATE.md +++ /dev/null @@ -1,26 +0,0 @@ -Thank you for creating a pull request to contribute to Adafruit's GitHub code! -Before you open the request please review the following guidelines and tips to -help it be more easily integrated: - -- **Describe the scope of your change--i.e. what the change does and what parts - of the code were modified.** This will help us understand any risks of integrating - the code. - -- **Describe any known limitations with your change.** For example if the change - doesn't apply to a supported platform of the library please mention it. - -- **Please run any tests or examples that can exercise your modified code.** We - strive to not break users of the code and running tests/examples helps with this - process. - -Thank you again for contributing! We will try to test and integrate the change -as soon as we can, but be aware we have many GitHub repositories to manage and -can't immediately respond to every request. There is no need to bump or check in -on a pull request (it will clutter the discussion of the request). - -Also don't be worried if the request is closed or not integrated--sometimes the -priorities of Adafruit's GitHub code (education, ease of use) might not match the -priorities of the pull request. Don't fret, the open source community thrives on -forks and GitHub makes it easy to keep your changes in a forked repo. - -After reviewing the guidelines above you can delete this text from the pull request. diff --git a/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/workflows/githubci.yml b/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/workflows/githubci.yml deleted file mode 100644 index fcd3f724c..000000000 --- a/MEMENTO/Memento_Shoulder_Robot/platformio_memento_shoulder_camera/lib/Adafruit_PyCamera/.github/workflows/githubci.yml +++ /dev/null @@ -1,44 +0,0 @@ -name: Arduino Library CI - -on: [pull_request, push, repository_dispatch] - -jobs: - build: - runs-on: ubuntu-latest - - steps: - - uses: actions/setup-python@v4 - with: - python-version: '3.x' - - uses: actions/checkout@v3 - - uses: actions/checkout@v3 - with: - repository: adafruit/ci-arduino - path: ci - - - name: pre-install - run: bash ci/actions_install.sh - - - name: test platforms - run: python3 ci/build_platform.py "pycamera_s3" - - - name: list - run: | - ls - ls examples/*/build/ - - - name: Upload build artifacts - uses: actions/upload-artifact@v3 - with: - name: example_uf2s - path: | - examples/*/build/*/*.uf2 - - - name: clang - run: python3 ci/run-clang-format.py -e "ci/*" -e "bin/*" -r . - - - name: doxygen - env: - GH_REPO_TOKEN: ${{ secrets.GH_REPO_TOKEN }} - PRETTYNAME : "Adafruit PyCamera Library" - run: bash ci/doxy_gen_and_deploy.sh