XilinxUploadHowTo.txt

How to upload and run hello01 using the Xilinx Microprocessor Debugger (XMD) 

Download and install the Xilinx ISE form http://www.xilinx.com/support/download/index.htm

 a) Connect the USB micro port named prog on the ZedBoard to the PC
 b) From the terminal window start XMD by typing: 
     xmd
 c)  connect arm hw    <- Connects to the the ARM Cortex-A9 processor 
 d)  dow hello01.elf   <- Download the .elf file to the ZedBoard
 c)  con               <- Starts the procssor/program

Retults: 
    The serial port should send out "Hello World!" (not show in  the xmd console)  


Screen dum of expected result:

XMD% connect arm hw

JTAG chain configuration
--------------------------------------------------
Device   ID Code        IR Length    Part Name
 1       4ba00477           4        Cortex-A9
 2       03727093           6        XC7Z020

CortexA9 Processor Configuration
-------------------------------------
Version.............................0x00000003
User ID.............................0x00000000
No of PC Breakpoints................6
No of Addr/Data Watchpoints.........1

Connected to "arm" target. id = 64
Starting GDB server for "arm" target (id = 64) at TCP port no 1234
XMD% dow hello01.elf
Downloading Program -- hello01.elf
        section, .ro: 0x00010000-0x0001008f
Setting PC with Program Start Address 0x00010000
XMD% con
Processor started. Type "stop" to stop processor

RUNNING> XMD% exit