turn OFF projector -no answer Epson EH-TW9300

[samsonovss]

sorry my english
turn on the projector - good
turn OFF projector - bad

After shutdown there is no response in home kit
three minutes later, the answer is received

FIX:
(PWR=OFF) please replace with (KEY=3B and KEY=3B) double-click

as in this script Python:
https://gist.github.com/0x4C4A/645b7a97281d624d88e29fcd7330fd75

There are other command:

---

Main Keys:

POWER: KEY=3B
HDMI1: KEY=4D
HDMI2: KEY=40
PC: KEY=44
VIDEO: KEY=46
USB: KEY=85
LAN: SOURCE=53
MUTE: KEY=3E

---

Picture Modes:

Dynamic: CMODE=06
Bright Cinema: CMODE=0C
Natural: CMODE=07
Cinema: CMODE=15
B&W Cinema: CMODE=20
Digital Cinema: CMODE=22

---

Image Settings:

4K "Preset Modes": IMGPRESET=00..05 (00 = Off, 01 = Preset 1, 02 = Preset 2, etc)
Power Consumption: LUMINANCE=00..02 (00 = High, 01 = ECO, 02 = Medium)
Auto Iris: IRIS=00..02 (00 = Off, 01 = Normal, 02 = High)

---

Preset Memory:

Load Memory Slot 1-10: POPMEM=02%20[01..0A] (01=Slot 1, 02=Slot 2 ... 0A=Slot 10). So, Load slot 8 would be: POPMEM=02%2008
Save Memory Slot 1-10: PUSHMEM= (same as above)

---

Lens Memory:

Load Memory Slot 1-8: POPLP=01..08 (01 = Slot 1, 02 = Slot 2, etc)
Save Memory Slot 1-8: PUSHLP=01..08 (same as above)

[danmarker7]

How were you able to get the command to enter 2 times to enter standby? I tried to edit index.js but I couldn't figure out the command to add delay and repeat.

    if (powerOn) {
        command = "PWR=ON";
    } else {
        command = "KEY=3B";