Releases: wills106/homeassistant-solax-modbus
2024.08.5
Warning Potential Breaking Change if moving from pre 2024.08.x to 2024.08.x
Due to a number of changes to the config_flow and the way Device info is populated it is recommended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
SolaX Mega Forth:
- Added support for MPPT 5 - 12 #944
Serial Number detection might need correcting for 75kW and above Inverters
2024.08.4
Warning Potential Breaking Change if moving from pre 2024.08.x to 2024.08.x
Due to a number of changes to the config_flow and the way Device info is populated it is recommended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
Growatt:
- Corrected duplicate values #791
- Corrected name changes from 2024.08.1
SolaX Mega Forth:
- Corrected duplicate values #944
2024.08.3
Warning Potential Breaking Change if moving from pre 2024.08.x to 2024.08.x
Due to a number of changes to the config_flow and the way Device info is populated it is recommended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
Growatt:
- Added "Inverter State" and "Run Mode" to TL3-X / TL3-XH #791
SolaX Mega Forth:
- Further work on Mega / Forth #944
2024.08.2
Warning Potential Breaking Change
Due to a number of changes to the config_flow and the way Device info is populated it is recommended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
SolaX:
- Corrected duplicate name #975
2024.08.1
Warning Potential Breaking Change
Due to a number of changes to the config_flow and the way Device info is populated it is recommended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
General:
- Changed Drop-Down Time selectors from 15m to 5m Intervals.
- Corrected "Detected blocking call to open inside the event loop" #920 #946
- Corrected "Detected code that calls async_forward_entry_setup" #948
- Wrap
ConnectionExceptionandModbusIOExceptionin a HomeAssistantError #937 #938
Sofar:
- Added following to scangroup_fast: #915
(Allows scanning at a faster rate than default)- "Active Power PCC Total"
- "Voltage L1"
- "Voltage L2"
- "Voltage L3"
- "Off-Grid Voltage L1"
- "Off-Grid Voltage L2"
- "Off-Grid Voltage L3"
- "PV Power 1"
- "PV Power 2"
- "Battery Power 1"
- "Battery Power 2"
- Add battery pack info as extra devices (BTS-5k) #926
SolaX:
2024.07.0 Beta5
Warning Potential Breaking Change
Due to a number of changes to the config_flow and the way Device info is populated it is recomended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
Beta 1:
General:
- Changed Drop-Down Time selectors from 15m to 5m Intervals.
- Corrected "Detected blocking call to open inside the event loop" #920 #946
- Wrap
ConnectionExceptionandModbusIOExceptionin a HomeAssistantError #937 #938
Sofar:
- Added following to scangroup_fast: #915
(Allows scanning at a faster rate than default)- "Active Power PCC Total"
- "Voltage L1"
- "Voltage L2"
- "Voltage L3"
- "Off-Grid Voltage L1"
- "Off-Grid Voltage L2"
- "Off-Grid Voltage L3"
- "PV Power 1"
- "PV Power 2"
- "Battery Power 1"
- "Battery Power 2"
- Add battery pack info as extra devices (BTS-5k) #926
SolaX:
- Added support for X3-PRO G2
- Altered Export Limit scale for more Inverters with serial starting 'H3UE' #922
- Corrected Device info for multiple Inverters #934
- Device info now has live firmware versions #909 #913
- Initial support for X3 Mega Inverters #944
Beta 2:
Resolved #948
Beta 3:
Corrected many entity name changed from Beta 1&2 on SolaX Inverters #949
Beta 4:
Corrected today_s_import_energy on SolaX Hybrid Inverters Gen3-5 and corrected today_s_yield on SolaX Hybrid Gen2 #949
Beta 5:
SolaX X1 Air:
- Added serial
SolaX X3 MIC Pro:
- Made serial detection more generic
SolaX X3 MEGA / FORTH G2:
- Attempt to Support Inverter
2024.07.0 Beta4
Warning Potential Breaking Change
Due to a number of changes to the config_flow and the way Device info is populated it is recomended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
Beta 1:
General:
- Changed Drop-Down Time selectors from 15m to 5m Intervals.
- Corrected "Detected blocking call to open inside the event loop" #920 #946
- Wrap
ConnectionExceptionandModbusIOExceptionin a HomeAssistantError #937 #938
Sofar:
- Added following to scangroup_fast: #915
(Allows scanning at a faster rate than default)- "Active Power PCC Total"
- "Voltage L1"
- "Voltage L2"
- "Voltage L3"
- "Off-Grid Voltage L1"
- "Off-Grid Voltage L2"
- "Off-Grid Voltage L3"
- "PV Power 1"
- "PV Power 2"
- "Battery Power 1"
- "Battery Power 2"
- Add battery pack info as extra devices (BTS-5k) #926
SolaX:
- Added support for X3-PRO G2
- Altered Export Limit scale for more Inverters with serial starting 'H3UE' #922
- Corrected Device info for multiple Inverters #934
- Device info now has live firmware versions #909 #913
- Initial support for X3 Mega Inverters #944
Beta 2:
Resolved #948
Beta 3:
Corrected many entity name changed from Beta 1&2 on SolaX Inverters #949
Beta 4:
Corrected today_s_import_energy on SolaX Hybrid Inverters Gen3-5 and corrected today_s_yield on SolaX Hybrid Gen2 #949
2024.07.0 Beta3
Warning Potential Breaking Change
Due to a number of changes to the config_flow and the way Device info is populated it is recomended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
Beta 1:
General:
- Changed Drop-Down Time selectors from 15m to 5m Intervals.
- Corrected "Detected blocking call to open inside the event loop" #920 #946
- Wrap
ConnectionExceptionandModbusIOExceptionin a HomeAssistantError #937 #938
Sofar:
- Added following to scangroup_fast: #915
(Allows scanning at a faster rate than default)- "Active Power PCC Total"
- "Voltage L1"
- "Voltage L2"
- "Voltage L3"
- "Off-Grid Voltage L1"
- "Off-Grid Voltage L2"
- "Off-Grid Voltage L3"
- "PV Power 1"
- "PV Power 2"
- "Battery Power 1"
- "Battery Power 2"
- Add battery pack info as extra devices (BTS-5k) #926
SolaX:
- Added support for X3-PRO G2
- Altered Export Limit scale for more Inverters with serial starting 'H3UE' #922
- Corrected Device info for multiple Inverters #934
- Device info now has live firmware versions #909 #913
- Initial support for X3 Mega Inverters #944
Beta 2:
Resolved #948
Beta 3:
Corrected many entity name changed from Beta 1&2 on SolaX Inverters #949
2024.07.0 Beta2
Warning Potential Breaking Change
Due to a number of changes to the config_flow and the way Device info is populated it is recomended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
Beta 1:
General:
- Changed Drop-Down Time selectors from 15m to 5m Intervals.
- Corrected "Detected blocking call to open inside the event loop" #920 #946
- Wrap
ConnectionExceptionandModbusIOExceptionin a HomeAssistantError #937 #938
Sofar:
- Added following to scangroup_fast: #915
(Allows scanning at a faster rate than default)- "Active Power PCC Total"
- "Voltage L1"
- "Voltage L2"
- "Voltage L3"
- "Off-Grid Voltage L1"
- "Off-Grid Voltage L2"
- "Off-Grid Voltage L3"
- "PV Power 1"
- "PV Power 2"
- "Battery Power 1"
- "Battery Power 2"
- Add battery pack info as extra devices (BTS-5k) #926
SolaX:
- Added support for X3-PRO G2
- Altered Export Limit scale for more Inverters with serial starting 'H3UE' #922
- Corrected Device info for multiple Inverters #934
- Device info now has live firmware versions #909 #913
- Initial support for X3 Mega Inverters #944
Beta 2:
Resolved #948
2024.07.0 Beta1
Warning Potential Breaking Change
Due to a number of changes to the config_flow and the way Device info is populated it is recomended to remove the Inverter(s) from the Integration before updating, restarting HA and adding the Inverter(s) back in again
Naming the Inverter(s) exactly the same as before will retain their history
General:
- Changed Drop-Down Time selectors from 15m to 5m Intervals.
- Corrected "Detected blocking call to open inside the event loop" #920 #946
- Wrap
ConnectionExceptionandModbusIOExceptionin a HomeAssistantError #937 #938
Sofar:
- Added following to scangroup_fast: #915
(Allows scanning at a faster rate than default)- "Active Power PCC Total"
- "Voltage L1"
- "Voltage L2"
- "Voltage L3"
- "Off-Grid Voltage L1"
- "Off-Grid Voltage L2"
- "Off-Grid Voltage L3"
- "PV Power 1"
- "PV Power 2"
- "Battery Power 1"
- "Battery Power 2"
- Add battery pack info as extra devices (BTS-5k) #926
SolaX: