RGBW dimmer is not reacting on color changes #3924

Thaui57 · 2024-10-05T08:32:48Z

Checklist

I am not using Home Assistant. Or: a developer has told me to come here.
I have checked the troubleshooting section and my problem is not described there.
I have read the changelog and my problem is not mentioned there.

Deploy method

Docker

Z-Wave JS UI version

9.21.0

ZwaveJS version

13.4.0

Describe the bug

since updating to 9.21.0 the RGBW dimmer is not reacting on color changes in Domoticz. Attached are the debug infos. On release 9.18.1 the dimmer worked well.

Quibino Flush RGBW Dimmer FW v2.98.txt

To Reproduce

color can be set in Zwave JS UI but not in Domoticz. The Zwave values does not change

Expected behavior

changing the color in Domoticz the color changes do not happen

Additional context

No response

robertsLando · 2024-10-07T08:49:21Z

So the discovery payload is:

"light_rgb_dimmer": {
      "type": "light",
      "object_id": "rgb_dimmer",
      "discovery_payload": {
        "state_topic": "zwave/Garderobe/38/0/currentValue",
        "command_topic": "zwave/Garderobe/38/0/targetValue/set",
        "on_command_type": "brightness",
        "state_value_template": "{{ \"OFF\" if value_json.value == 0 else \"ON\" }}",
        "brightness_value_template": "{{ value_json.value }}",
        "brightness_scale": 99,
        "rgb_command_template": "{{ {'red': red, 'green': green, 'blue': blue}|to_json }}",
        "rgb_value_template": "{{ value_json.value.red }},{{ value_json.value.green }},{{ value_json.value.blue }}",
        "supported_color_modes": [
          "rgb",
          "brightness"
        ],
        "rgb_state_topic": "zwave/Garderobe/51/0/currentColor",
        "rgb_command_topic": "zwave/Garderobe/51/0/targetColor/set",
        "brightness_state_topic": "zwave/Garderobe/38/0/currentValue",
        "brightness_command_topic": "zwave/Garderobe/38/0/targetValue/set",
        "availability": [
          {
            "payload_available": "true",
            "payload_not_available": "false",
            "topic": "zwave/Garderobe/status",
            "value_template": "{{'true' if value_json.value else 'false'}}"
          },
          {
            "topic": "zwave/_CLIENTS/ZWAVE_GATEWAY-Zwavejs2Mqtt/status",
            "value_template": "{{'online' if value_json.value else 'offline'}}"
          },
          {
            "payload_available": "true",
            "payload_not_available": "false",
            "topic": "zwave/driver/status"
          }
        ],
        "availability_mode": "all",
        "device": {
          "identifiers": [
            "zwavejs2mqtt_0xdbf01f81_node8"
          ],
          "manufacturer": "Qubino",
          "model": "Qubino Flush RGBW Dimmer (ZMNHWD)",
          "name": "Garderobe",
          "sw_version": "2.98"
        },
        "name": "Garderobe_rgb_dimmer",
        "unique_id": "zwavejs2mqtt_0xdbf01f81_8-51-0-currentColor"
      },
      "values": [
        "38-0-currentValue",
        "38-0-targetValue",
        "51-0-currentColor",
        "51-0-targetColor"
      ],
      "discoveryTopic": "light/Garderobe/rgb_dimmer/config",
      "persistent": false,
      "ignoreDiscovery": false
    }

We should compare this with the discovery payload you had in 9.18 to see if something changed that could have broke this. Also do you see any error on ZUI logs when you try to change the color?

Thaui57 · 2024-10-08T08:14:03Z

how can I downgrade to 9.18.1

robertsLando · 2024-10-08T08:25:29Z

@Thaui57 Just specify 9.18 as tag. Anyway i would like to also see logs from 9.21.0 first to see what's received by zui when you try to send a color change from Domoticz

Thaui57 · 2024-10-08T14:06:17Z

attached the log file. I seems that changes made in ZUI will send to Domoticz but the other way round there is no change in ZUI
z-ui_2024-10-08.log

robertsLando · 2024-10-09T07:48:03Z

Seems the error is:

2024-10-08 15:46:50.189 INFO MQTT: Message received on zwave/Garderobe/38/0/targetValue/set: '22'
2024-10-08 15:46:50.200 INFO MQTT: Message received on zwave/Garderobe/51/0/targetColor/set: '{"state":"ON","value":22}'
2024-10-08 15:46:50.191 INFO Z-WAVE: Writing 22 to 8-38-0-targetValue
2024-10-08 15:46:50.202 INFO Z-WAVE: Writing 22 to 8-51-0-targetColor
2024-10-08 15:46:50.209 ERROR Z-WAVE: Unable to write 22 on 51-0-targetColor: Color Switch: "targetColor" must be set to an object which specifies each color channel (ZW0322)

I don't understand why domoticz is sending 22 to targetColor while in the discovery payload it's very clear that:

        "rgb_command_template": "{{ {'red': red, 'green': green, 'blue': blue}|to_json }}",
		        "rgb_command_topic": "zwave/Garderobe/51/0/targetColor/set",

I would forward this request to domoticz team

Thaui57 · 2024-10-09T15:14:52Z

Thanks for your survey. I believe that I have updated Domoticz to the last stable version 2024.7 before I updated Zwave js ui to 9.18.1. In 9.18.1 the dzvents script worked well and has changed the color as expected. Since 9.21.1 the malfunction appears. The dzvents script send the following command e.g: dz.devices(14).setColor(255,0,200,100,0,w,4,0). So I am not using the Domoticz GUI. I am sending via a test script color data but r,g,b 50,50,50 will be 2,0,2 in Zwave js ui

robertsLando · 2024-10-09T16:01:55Z

The dzvents script send the following command e.g: dz.devices(14).setColor(255,0,200,100,0,w,4,0). So I am not using the Domoticz GUI. I am sending via a test script color data but r,g,b 50,50,50 will be 2,0,2 in Zwave js ui

I dunno what you mean with dzevents script as I'm not a Domoticz user but as said the issue here is that the discovery rgb command template is not respected. It should send a JSON payload like:

{"red": 50, "green": 50, "blue": 50}

While it sends

{"state":"ON","value":22}

instead

Thaui57 · 2024-10-10T08:39:23Z

the issue can be closed. after my door sensors also stoped working I flashed back a full SD card backup from Oktobera 1st. I am now back on zui 9.18.1 and zwavejs 13.2.0. System is back and operating well. Thanks for your support

robertsLando · 2024-10-10T08:57:42Z

yeah but you will need to upgrade one day or another and so I still don't understand what made it break in latest version

EwoutSnel · 2024-10-26T20:05:39Z

Experiencing the same issue with same Qubino RGBW dimmer. Made a forum post at Domoticz website.
https://www.domoticz.com/forum/viewtopic.php?t=42783
If possible please re-open.

EwoutSnel · 2024-11-12T12:56:26Z

@robertsLando if you have time, would you be so kind to read the post in the Domoticz forum? For me it is still unclear if this is a Domoticz bug or a Zwave-JS-UI bug.

robertsLando · 2024-11-12T13:26:22Z

@EwoutSnel Seems like domoticz is sending a wrong payload to targetColor, that payload makes no sense. If you revert to a previous working version what do you receive there? Did you checked if there are changes between the 2 discovery payloads sent by zui in the working and not working version? Comparing the 2 discovery payloads is the first thing to check

Thaui57 · 2024-11-21T17:15:50Z

@robertsLando If there are no changes on the Domoticz platform and the rgbw dimmer works with zwave js UI version 9.18.1 but not with a newer version the problem is caused by zwavejs. Or am I wrong?

robertsLando · 2024-11-22T09:25:07Z

@Thaui57 I agree this is why I also asked to place here both discovery payload sent to domoticz (the working and not working one) as that is the only thing that could have break this. The command domoticz sent makes just no sense:

2024-10-08 15:46:50.200 INFO MQTT: Message received on zwave/Garderobe/51/0/targetColor/set: '{"state":"ON","value":22}'

Thaui57 · 2024-11-22T12:54:27Z

@robertsLando not so easy in a productive system. I do my best do deliver a comparison log file soon. Otherwise we have no chance to sort it out. Thanks for your help

Thaui57 · 2024-11-22T15:23:46Z

@robertsLando attached you will find two log files. One generated with 9.18.1 and the other 9.27.5. In the newer release the color change doesn't work. I hope that are the data you requested.
z-ui_2024-11-22_rel_9-18-1.log
z-ui_2024-11-22_rel_9-27-5.log

robertsLando · 2024-11-25T16:55:41Z

@Thaui57 thanks for the logs 🙏🏼

Discovery from 9.18.1:

 {
  type: 'light',
  object_id: 'rgb_dimmer_1',
  discovery_payload: {
    state_topic: 'zwave/Arbeitszimmer_LED/38/1/currentValue',
    command_topic: 'zwave/Arbeitszimmer_LED/38/1/targetValue/set',
    on_command_type: 'brightness',
    state_value_template: '{{ "OFF" if value_json.value == 0 else "ON" }}',
    brightness_value_template: '{{ value_json.value }}',
    brightness_scale: 99,
    rgb_command_template: "{{ {'red': red, 'green': green, 'blue': blue}|to_json }}",
    rgb_value_template: '{{ value_json.value.red }},{{ value_json.value.green }},{{ value_json.value.blue }}',
    rgb_state_topic: 'zwave/Arbeitszimmer_LED/51/1/currentColor',
    rgb_command_topic: 'zwave/Arbeitszimmer_LED/51/1/targetColor/set',
    brightness_state_topic: 'zwave/Arbeitszimmer_LED/38/1/currentValue',
    brightness_command_topic: 'zwave/Arbeitszimmer_LED/38/1/targetValue/set',
    availability: [
      {
        payload_available: 'true',
        payload_not_available: 'false',
        topic: 'zwave/Arbeitszimmer_LED/status',
        value_template: "{{'true' if value_json.value else 'false'}}"
      },
      {
        topic: 'zwave/_CLIENTS/ZWAVE_GATEWAY-Zwavejs2Mqtt/status',
        value_template: "{{'online' if value_json.value else 'offline'}}"
      },
      {
        payload_available: 'true',
        payload_not_available: 'false',
        topic: 'zwave/driver/status'
      },
      [length]: 3
    ],
    availability_mode: 'all',
    device: {
      identifiers: [ 'zwavejs2mqtt_0xdbf01f81_node47', [length]: 1 ],
      manufacturer: 'Fibargroup',
      model: 'RGBW CONTROLLER 2 (FGRGBW-442)',
      name: 'Arbeitszimmer LED',
      sw_version: '5.0'
    },
    name: 'Arbeitszimmer LED_rgb_dimmer_1',
    unique_id: 'zwavejs2mqtt_0xdbf01f81_47-51-1-currentColor'
  },
  values: [
    '38-1-currentValue',
    '38-1-targetValue',
    '51-1-currentColor',
    '51-1-targetColor',
    [length]: 4
  ],
  discoveryTopic: 'light/Arbeitszimmer_LED/rgb_dimmer_1/config',
  persistent: false,
  ignoreDiscovery: false
}

Discovery from 9.27.5

{
  type: 'light',
  object_id: 'rgb_dimmer_1',
  discovery_payload: {
    state_topic: 'zwave/Arbeitszimmer_LED/38/1/currentValue',
    command_topic: 'zwave/Arbeitszimmer_LED/38/1/targetValue/set',
    on_command_type: 'brightness',
    state_value_template: '{{ "OFF" if value_json.value == 0 else "ON" }}',
    brightness_value_template: '{{ value_json.value }}',
    brightness_scale: 99,
    rgb_command_template: "{{ {'red': red, 'green': green, 'blue': blue}|to_json }}",
    rgb_value_template: '{{ value_json.value.red }},{{ value_json.value.green }},{{ value_json.value.blue }}',
    supported_color_modes: [ 'rgb', 'brightness', [length]: 2 ],
    rgb_state_topic: 'zwave/Arbeitszimmer_LED/51/1/currentColor',
    rgb_command_topic: 'zwave/Arbeitszimmer_LED/51/1/targetColor/set',
    brightness_state_topic: 'zwave/Arbeitszimmer_LED/38/1/currentValue',
    brightness_command_topic: 'zwave/Arbeitszimmer_LED/38/1/targetValue/set',
    availability: [
      {
        payload_available: 'true',
        payload_not_available: 'false',
        topic: 'zwave/Arbeitszimmer_LED/status',
        value_template: "{{'true' if value_json.value else 'false'}}"
      },
      {
        topic: 'zwave/_CLIENTS/ZWAVE_GATEWAY-Zwavejs2Mqtt/status',
        value_template: "{{'online' if value_json.value else 'offline'}}"
      },
      {
        payload_available: 'true',
        payload_not_available: 'false',
        topic: 'zwave/driver/status'
      },
      [length]: 3
    ],
    availability_mode: 'all',
    device: {
      identifiers: [ 'zwavejs2mqtt_0xdbf01f81_node47', [length]: 1 ],
      manufacturer: 'Fibargroup',
      model: 'RGBW CONTROLLER 2 (FGRGBW-442)',
      name: 'Arbeitszimmer LED',
      sw_version: '5.0'
    },
    name: 'Arbeitszimmer LED_rgb_dimmer_1',
    unique_id: 'zwavejs2mqtt_0xdbf01f81_47-51-1-currentColor'
  },
  values: [
    '38-1-currentValue',
    '38-1-targetValue',
    '51-1-currentColor',
    '51-1-targetColor',
    [length]: 4
  ],
  discoveryTopic: 'light/Arbeitszimmer_LED/rgb_dimmer_1/config',
  persistent: false,
  ignoreDiscovery: false
}

The only thing changed between this two discovery payload is supported_color_modes: [ 'rgb', 'brightness', [length]: 2 ],

Question is if domoticz handles this correctly or not, I have a feel that if you remove that from discovery it will work as expected. This change has been added in order to fix #3894 and first release with that has been 9.19.0

EwoutSnel · 2024-11-25T20:28:55Z

@robertsLando and @Thaui57

So this are the steps I did:

upgrade Zwave-JS-UI container to latest version
find the specific node and the "light_rgb_dimmer" entity under "Home Assistant"
deleted the complete line "supported_color_modes" in the JSON field
clicked on update
rebooted my Domoticz container
succes!!!

RGB dimmer is now working as before and as expected!

However this change does NOT survive a restart of Zwave-JS-UI.......

Any ideas how to make this change persistent?

kpine · 2024-11-26T01:38:58Z

The only thing changed between this two discovery payload is supported_color_modes: [ 'rgb', 'brightness', [length]: 2 ],

I would have no clue how strictly Domoticz adheres to the HA MQTT discovery schema, but this payload value is invalid. See docs: https://www.home-assistant.io/integrations/light.mqtt/#supported_color_modes

A list of color modes supported by the list. Possible color modes are onoff, brightness, color_temp, hs, xy, rgb, rgbw, rgbww, white. Note that if onoff or brightness are used, that must be the only value in the list.

robertsLando · 2024-11-26T09:03:01Z

Note that if onoff or brightness are used, that must be the only value in the list.

Oh maybe the issue is that so, but if the device supports both brightness and RGB should I only report rgb so? Or maybe rgbw?

Thaui57 · 2024-12-09T21:04:26Z

@robertsLando is there any improvement on this issue?

robertsLando · 2024-12-11T09:37:54Z

@Thaui57 Could you try to manually edit the json and changing the supported_color_modes to rgbw ?

EwoutSnel · 2024-12-11T15:40:29Z

Changed this:
"supported_color_modes": [ "rgb", "brightness" ],

Into this:
"supported_color_modes": "rgbw",

Afterwards I did a reboot of Domoticz container.

Unfortunately the color changes do NOT work with this change, as far as I can tell.

@Thaui57 can you also test this?

kpine · 2024-12-11T19:25:41Z

Should it be this?

    brightness: true
    supported_color_modes: ["rgb"]

There was no indication of RGBW support in the original discovery schema (except the product name), and the brightness flag is there to indicate brightness + rgb/rgbw/rgbww.

robertsLando · 2024-12-12T10:19:49Z

@Thaui57 @EwoutSnel could you try kpine suggestion? Also I would put the values between square brackets as that is a list:

    "brightness": true
    "supported_color_modes": ["rgb"]

kpine · 2024-12-12T15:12:35Z

Also I would put the values between square brackets as that is a list:

Thanks, that's right. (fixed my original)

EwoutSnel · 2024-12-13T18:00:37Z

Sorry guys, still no success with this suggestion.

The only working solution is to completely remove the "supported_color_modes" line from the json.

kpine · 2024-12-13T18:14:54Z

Sorry guys, still no success with this suggestion.

The only working solution is to completely remove the "supported_color_modes" line from the json.

Perhaps you should setup a test instance of HA with MQTT and see if it works there. If working in HA, then it's a Domoticz problem.

robertsLando · 2024-12-16T09:22:59Z

@EwoutSnel could you try asking to Domotiz team if they support supported_color_modes correctly in MQTT autodiscovery?

Thaui57 added the bug Something isn't working label Oct 5, 2024

robertsLando mentioned this issue Oct 10, 2024

All door sensors stopped working zwave-js/node-zwave-js#7267

Closed

3 tasks

Thaui57 closed this as completed Oct 24, 2024

robertsLando reopened this Oct 28, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

RGBW dimmer is not reacting on color changes #3924

RGBW dimmer is not reacting on color changes #3924

Thaui57 commented Oct 5, 2024

robertsLando commented Oct 7, 2024

Thaui57 commented Oct 8, 2024

robertsLando commented Oct 8, 2024

Thaui57 commented Oct 8, 2024 •

edited

Loading

robertsLando commented Oct 9, 2024

Thaui57 commented Oct 9, 2024 •

edited

Loading

robertsLando commented Oct 9, 2024 •

edited

Loading

Thaui57 commented Oct 10, 2024

robertsLando commented Oct 10, 2024

EwoutSnel commented Oct 26, 2024

EwoutSnel commented Nov 12, 2024

robertsLando commented Nov 12, 2024

Thaui57 commented Nov 21, 2024

robertsLando commented Nov 22, 2024

Thaui57 commented Nov 22, 2024

Thaui57 commented Nov 22, 2024 •

edited

Loading

robertsLando commented Nov 25, 2024 •

edited

Loading

EwoutSnel commented Nov 25, 2024

kpine commented Nov 26, 2024

robertsLando commented Nov 26, 2024 •

edited

Loading

Thaui57 commented Dec 9, 2024

robertsLando commented Dec 11, 2024

EwoutSnel commented Dec 11, 2024 •

edited

Loading

kpine commented Dec 11, 2024 •

edited

Loading

robertsLando commented Dec 12, 2024

kpine commented Dec 12, 2024 •

edited

Loading

EwoutSnel commented Dec 13, 2024

kpine commented Dec 13, 2024

robertsLando commented Dec 16, 2024

RGBW dimmer is not reacting on color changes #3924

RGBW dimmer is not reacting on color changes #3924

Comments

Thaui57 commented Oct 5, 2024

Checklist

Deploy method

Z-Wave JS UI version

ZwaveJS version

Describe the bug

To Reproduce

Expected behavior

Additional context

robertsLando commented Oct 7, 2024

Thaui57 commented Oct 8, 2024

robertsLando commented Oct 8, 2024

Thaui57 commented Oct 8, 2024 • edited Loading

robertsLando commented Oct 9, 2024

Thaui57 commented Oct 9, 2024 • edited Loading

robertsLando commented Oct 9, 2024 • edited Loading

Thaui57 commented Oct 10, 2024

robertsLando commented Oct 10, 2024

EwoutSnel commented Oct 26, 2024

EwoutSnel commented Nov 12, 2024

robertsLando commented Nov 12, 2024

Thaui57 commented Nov 21, 2024

robertsLando commented Nov 22, 2024

Thaui57 commented Nov 22, 2024

Thaui57 commented Nov 22, 2024 • edited Loading

robertsLando commented Nov 25, 2024 • edited Loading

EwoutSnel commented Nov 25, 2024

kpine commented Nov 26, 2024

robertsLando commented Nov 26, 2024 • edited Loading

Thaui57 commented Dec 9, 2024

robertsLando commented Dec 11, 2024

EwoutSnel commented Dec 11, 2024 • edited Loading

kpine commented Dec 11, 2024 • edited Loading

robertsLando commented Dec 12, 2024

kpine commented Dec 12, 2024 • edited Loading

EwoutSnel commented Dec 13, 2024

kpine commented Dec 13, 2024

robertsLando commented Dec 16, 2024

Thaui57 commented Oct 8, 2024 •

edited

Loading

Thaui57 commented Oct 9, 2024 •

edited

Loading

robertsLando commented Oct 9, 2024 •

edited

Loading

Thaui57 commented Nov 22, 2024 •

edited

Loading

robertsLando commented Nov 25, 2024 •

edited

Loading

robertsLando commented Nov 26, 2024 •

edited

Loading

EwoutSnel commented Dec 11, 2024 •

edited

Loading

kpine commented Dec 11, 2024 •

edited

Loading

kpine commented Dec 12, 2024 •

edited

Loading