KSP_MOCR A7

KSP_MOCR Alpha 7!

Changelist:

• FDAI YAW RATE needle now moves in the correct direction.
• DSKY/AGC is operational again. Documentation T.B.D.
• New graph: (SCR 57) Gs/Inertial velocity. For Re-Entry monitoring.
• New graph: (SCR 58) Apoapse/Periapse/Altitude vs. time. (This is a big version of the left graph on SCR 1)
• Can set target angles for FDAI on NOUN 23 with VERB 20.
• New panel: (SCR 110) Maneuver Node Editing
• New screen: (SCR 13) Future Orbits. Maneuver nodes and sphere of influence changes
• New screen: (SCR 14) Maneuver Nodes. Data on nodes.
• Change screen: (SCR 4) Orbit view.

Known Issues:

• The inertial angles are all messed up. I think... Getting to grips on them will be a priority for A8.
• The orbit view (SCR 4) fails if orbit is a perfect circle. (i.e. eccentriciy is 0)
• The orbit view (SCR 4) do not draw correct orbit around another sphere of influence.

If you are not planning on running a PySSSMQ-server, you can download the smaller A6_noPython.zip file.
You can still connect to a PySSSMQ-server with this smaller installation.

KSP_MOCR A6

KSP_MOCR Alpha 5!

Changelist:

• Pilot-screen (#100) diabled. (So many things were wrong there, and it did bad things)
• New screen for FDAI (#101)
• Added error needles and roll rates to the FDAI
• New screen for DSKY (#102) (Not wery functional, but the look of it)
• Started rewrite of AGC, and added button on main form for starting/stopping it. The AGC should only be running on one instance of KSP_MOCR, preferably the same that will use the DSKY. The state of the AGC is then transmitted to other instances via PySSSMQ.
• New screen: Temperature (#7). Shows the hottest parts, parts with ablator resource, and radiators.
• New screen: Consumables (#3). Show parts that contains either liquid fuel, oxydizer or monopropellant.
• New screen: Electrical system (#6). Show parts that either uses, generates or stores electricity.
• Redone screen: Booster (#2). The booster screen is completly redone.
• Redone screen: Orbit View (#4). Removed the old FIDO-screen (whitch did'nt work), and replaced with simple orbit-view. (Inclination not included)

If you are not planning on running a PySSSMQ-server, you can download the smaller A6_noPython.zip file.
You can still connect to a PySSSMQ-server with this smaller installation.

KSP_MOCR A5

KSP_MOCR Alpha 5!

Changelist:

• ADD: Screen 56. Graph of Flight Path Angle vs. Inertial Velocity
• CHANGE: New method of calculating max HDOT (Screen 55). It is now (Apoapsis / OrbitalSpeedAtApoapsis) * 20. (This is just a guess by me)
• CHANGE. New style on StatusReport and StatusPanel, with panel screws.
• ADD: Screen 60. Event Indicator Panel for the FIDO console. No functionality.
• ADD: Screen 70. First Event Indicator Panel (out of 5) for the EECOM console. No functionality.

This is a early test release, expect frequent crashes and freezes.

And for your convenience, if you do not need to run a PySSSMQ-server, you can download KSP_MOCR without Python.

KSP_MOCR A4

KSP_MOCR Alpha 4!

Changes:

• More changes to graph-class
• Added H/Hdot-graph (screen 55)
• Added some controls to map-view (sceen 8), show/hide tail, set tail length, fade tail

This is a early test release, expect frequent crashes and freezes.
Also, no manual!

Good luck.
:-)

(Python is still included, hence the big zip-size.)

KSP_MOCR A3

This is KSP_MOCR Alpha 3!

Changes from Alpha 2:

• Partial rewrite of graph-system for more flexibility
• Added new graphs (alt/range, ToA/Vel)
• Fewer crashes, hopefully.

This is a early test release, expect frequent crashes and freezes.
Also, no manual!

Good luck.
:-)

(Python is still included, hence the big zip-size.)

KSP_MOCR A2

This is KSP_MOCR Alpha 2!

This is a early test release, expect frequent crashes and freezes.
Also, no manual!

Good luck.
:-)

(The zip-file is huge (28.7 MB) because Python 2.7 is included. I hope to just detect an existing installation at some point, but for now this works.)

KSP_MOCR A1

This is KSP_MOCR Alpha 1!

This is a early test release, expect frequent crashes and freezes.
Also, no manual!

Good luck.
:-)