Add test sketches for validating CI action

.gitignore

@@ -4,4 +4,5 @@
 doxyHtml
 doc
 html
-docs/html
+docs/html
+**/build/

embedded/1A2A-MASTER_ARM_PANEL/1A2A-MASTER_ARM_PANEL.ino

@@ -0,0 +1,194 @@
+/**************************************************************************************
+ *        ____                   _    _                       _
+ *       / __ \                 | |  | |                     | |
+ *      | |  | |_ __   ___ _ __ | |__| | ___  _ __ _ __   ___| |_
+ *      | |  | | '_ \ / _ \ '_ \|  __  |/ _ \| '__| '_ \ / _ \ __|
+ *      | |__| | |_) |  __/ | | | |  | | (_) | |  | | | |  __/ |_
+ *       \____/| .__/ \___|_| |_|_|  |_|\___/|_|  |_| |_|\___|\__|
+ *             | |
+ *             |_|
+ *
+ *
+ *   Project OpenHornet
+ *
+ *   The OpenHornet Project is a F/A-18C OFP 13C Lot 20 1:1 Replica Simulator,
+ *   consisting of a physical structure and electrical/software interfaces to a PC
+ *   to be driven by Digital Combat Simulator (DCS).
+ *
+ *   ---------------------------------------------------------------------------------
+ *
+ *   This Project is released under the Creative Commons
+ *   Atribution - Non Comercal - Share Alike License.
+ *
+ *   CC BY-NC-SA 3.0
+ *
+ *   You are free to:
+ *   - Share — copy and redistribute the material in any medium or format
+ *   - Adapt — remix, transform, and build upon the material
+ *   The licensor cannot revoke these freedoms as long as you follow the license terms.
+ *
+ *   Under the following terms:
+ *   - Attribution — You must give appropriate credit, provide a link to the license,
+ *     and indicate if changes were made. You may do so in any reasonable manner,
+ *     but not in any way that suggests the licensor endorses you or your use.
+ *   - NonCommercial — You may not use the material for commercial purposes.
+ *   - ShareAlike — If you remix, transform, or build upon the material,
+ *     you must distribute your contributions under the same license as the original.
+ *
+ *   No additional restrictions — You may not apply legal terms or technological
+ *   measures that legally restrict others from doing anything the license permits.
+ *
+ *   More Information about the license can be found under:
+ *   https://creativecommons.org/licenses/by-nc-sa/3.0/
+ *
+ *   ---------------------------------------------------------------------------------
+ *
+ *   The OpenHornet Software is based on DCS-BIOS
+ *   You can find more information here: http://dcs-bios.a10c.de
+ *
+ *   DCS-BIOS is released under the following terms:
+ *   https://github.com/dcs-bios/dcs-bios/blob/develop/DCS-BIOS-License.txt
+ *
+ *   ---------------------------------------------------------------------------------
+ *
+ *   This Project uses Doxygen as a documentation generator.
+ *   Please use Doxigen capable comments.
+ *
+ **************************************************************************************/
+
+/**
+ * @file 1A2A-MASTER_ARM_PANEL.ino
+ * @author Balz Reber
+ * @date 29.12.2019
+ * @version u.0.0.1 (untested)
+ * @warning This sketch is based on a wiring diagram, and was not yet tested on hardware
+ * @brief UIP Master Arm Panel Sketch
+ *
+ * @details Sketch for the Upper Instrument Panel, Master Arm Panel
+ * 
+ * **Intended Board:**
+ * ABSIS NANO
+ * 
+ * **Wiring diagram:**
+ * 
+ * PIN | Function
+ * --- | ---
+ * 3   | .55 SQ INDICATOR DISCH Light
+ * 4   | .55 SQ INDICATOR READY Light
+ * 6   | MASTER MODE A/A Light
+ * 7   | MASTER MODE A/A Switch
+ * 8   | MASTER MODE A/G Switch
+ * 9   | MASTER MODE A/G Light
+ * 10  | MASTER ARM Toggle Switch
+ * 11  | EMERGENCY JETT Button 
+ * 
+ */
+#define DCSBIOS_DEFAULT_SERIAL 1
+
+/**
+ * DCS BIOS Slave ID
+ * 
+ * The following \#define tells DCS-BIOS that this is a RS-485 slave device.
+ * It also sets the address of this slave device. Since this is for the 1A2A Master Arm Panel
+ * the slave address is 2, according to 1A2A.
+ */
+// #define DCSBIOS_RS485_SLAVE 2 # Not working yet
+
+/**
+ * TX Enable Pin
+ * 
+ * The Arduino pin that is connected to the
+ * /RE and DE pins on the RS-485 transceiver.
+ * This is **Pin 2** in all ABSIS NANO boards.
+*/
+#define TXENABLE_PIN 2
+
+/**
+ * DCS Bios library include
+ */
+#include "DcsBios.h"
+
+
+/**
+ * .55 SQ INDICATOR READY Light on **Pin 4**
+ * @return todo
+ */
+DcsBios::LED mcReady(0x740c, 0x8000, 4);
+
+/**
+ * .55 SQ INDICATOR DISCH Light on **Pin 3**
+ * @return todo
+ */
+DcsBios::LED mcDisch(0x740c, 0x4000, 3);
+
+
+/**
+ * .55 SQ INDICATOR Button Functionality not implemented
+ * in the F/A-18 DCS Module yet.
+ */
+
+/**
+ * MASTER ARM Toggle Switch on *Pin 10*
+ * @return todo
+ */
+DcsBios::Switch2Pos masterArmSw("MASTER_ARM_SW", 10);
+
+
+/**
+ * MASTER MODE A/A Switch on **Pin 7**
+ * @return todo
+ */
+DcsBios::Switch2Pos masterModeAa("MASTER_MODE_AA", 7);
+
+/**
+ * MASTER MODE A/A Light on **Pin 6**
+ * @return todo
+ */
+DcsBios::LED masterModeAaLt(0x740c, 0x0200, 6);
+
+/**
+ * MASTER MODE A/G Switch on **Pin 8**
+ * @return todo
+ */
+DcsBios::Switch2Pos masterModeAg("MASTER_MODE_AG", 8);
+
+/**
+ * MASTER MODE A/G Light on **Pin 9**
+ * @return todo
+ */
+DcsBios::LED masterModeAgLt(0x740c, 0x0400, 9);
+
+
+/**
+ * EMERGENCY JETTISON BUTTON on **Pin 11**
+ * @return todo
+ */
+DcsBios::Switch2Pos emerJettBtn("EMER_JETT_BTN", 11);
+
+
+
+/**
+* Arduino Setup Function
+*
+* Arduino standard Setup Function. Code who should be executed
+* only once at the programm start, belongs in this function.
+*/
+void setup() {
+
+  // Run DCS Bios setup function
+  DcsBios::setup();
+
+}
+
+/**
+* Arduino Loop Function
+*
+* Arduino standard Loop Function. Code who should be executed
+* over and over in a loop, belongs in this function.
+*/
+void loop() {
+
+  //Run DCS Bios loop function
+  DcsBios::loop();
+
+}

embedded/1A2A-MASTER_ARM_PANEL/Makefile

@@ -0,0 +1,8 @@
+BOARD_TAG  = promicro
+BOARD_SUB  = 16MHzatmega32U4
+TARGET     = 1A2A-MASTER_ARM_PANEL
+ARDUINO_LIBS = Servo dcs-bios-arduino-library
+
+
+include ../../include/promicro.mk
+include ../../include/openhornet.mk

embedded/BACKLIGHT_TEST/Makefile

@@ -0,0 +1,7 @@
+BOARD_TAG  = promicro
+BOARD_SUB  = 16MHzatmega32U4
+TARGET     = OH_BACKLIGHT_TEST
+ARDUINO_LIBS = Adafruit_NeoPixel Servo dcs-bios-arduino-library
+
+include ../../include/promicro.mk
+include ../../include/openhornet.mk