Aiotunnel

Yet another HTTP tunnel, supports two modes; a direct one which open a local port on the host machine and redirect all TCP data to the remote side of the tunnel, which actually connect to the desired URL. A second one which require the client part to run on the target system we want to expose, the server side on a (arguably) public machine (e.g. an AWS EC2) which expose a port to communicate to our target system through HTTP.

Quickstart

Let's suppose we have a machine located at 10.5.0.240 that we want to expose SSH access and a server on which we have free access located at 10.5.0.10; we really don't know if port 22 on 10.5.0.240 is already exposed or if the IP address will change, we actually don't care because once set the server address, it will retrieve all incoming commands via HTTP GET requests to our known server.

    10.0.50.15 <----> (TCP) 8888:10.5.0.10:8080 (HTTP) <----> 10.5.0.240:22

So just run the tunneld on the server at 10.5.0.10 (you probably want to daemonize it through NOHUP or by creating a systemd service) in reverse mode:

[email protected]:~$ aiotunnel server -r
======== Running on http://0.0.0.0:8080 ========
(Press CTRL+C to quit)

On the target machine at 10.5.0.240 run the client bound to the service we want to expose (SSH in this case but could be anything):

[email protected]:~$ aiotunnel client --server-addr 10.5.0.10 --server-port 8080 -A localhost -P 22 -r
[2018-10-14 22:20:45,806] Opening a connection with 127.0.0.1:22 and 0.0.0.0:8888 over HTTP
[2018-10-14 22:20:45,831] 0.0.0.0:8888 over HTTP to http://10.5.0.10:8080/aiotunnel
[2018-10-14 22:20:45,832] Obtained a client id: aeb7cfc6-3de3-4bc1-b769-b81641d496eb

Now we're ready to open an SSH session to 10.5.0.10 even in the case of a closed 22 port or a different IP address.

[email protected]:~$ ssh [email protected] -p 8888

Welcome to Linux 4.19.0-1-MANJARO
Last login: Thu Feb 11 17:28:20 2016
[email protected]:~$

A more common approach is to use the tunnel without -r/--reverse flag. In this case we actually have the port 22 exposed on the target system, but our network do not permit traffic over SSH. In this case we use a known server as a proxy to demand the actual SSH connection to him, while we communicate with him by using HTTP requests:

• POST to establish the connection
• PUT to send data
• GET to read responses
• DELETE to close the connection

So on our known server located at 10.5.0.10 we start a tunneld process

[email protected]:~$ aiotunnel server
======== Running on http://0.0.0.0:8080 ========
(Press CTRL+C to quit)

On the network-constrainted machine we start a tunnel instance

[email protected]:~$ aiotunnel -A 10.0.5.240 -P 22
[2018-10-15 00:58:41,744] Opening local port 8888 and 10.0.5.240:22 over HTTP

And we're good to go.

It's possible to use the Dockerfile to build an image and run it in a container, default start with a command aiotunnel server -r, easily overridable.

[email protected]:~$ docker build -t aiotunnel /path/to/aiotunnel
[email protected]:~$ docker run --rm --network host aiotunnel aiotunnel client --server-addr 10.5.0.10 --server-port 8080 -A localhost -p 22 -r

Security

SSL/TLS is supported, just set certificates cain and ca in the configuration or by the CLI process to encrypt the communication and use HTTPS (defaulting on port 8443 instead of 8080)

[email protected]:~$ aiotunnel server -r --ca /path/to/ca.crt --cert /path/to/cert.crt --key
/path/to/keyfile.key
======== Running on https://0.0.0.0:8443 ========

And client side

[email protected]:~$ aiotunnel client -A 127.0.0.1 -P 22 --ca /path/to/ca.crt --cert
/path/to/cert.crt --key /path/to/keyfile.key
[2018-10-18 22:20:45,806] Opening a connection with 127.0.0.1:22 and 0.0.0.0:8888 over HTTPS
[2018-10-18 22:20:45,831] 0.0.0.0:8888 over HTTPS to https://10.5.0.10:8443/aiotunnel
[2018-10-18 22:20:45,832] Obtained a client id: aeb7dfc4-3da3-4wc1-b769-n81621db96eb

Installation

Clone the repository and install it locally or play with it using python -i or ipython.

$ git clone https://github.com/codepr/aiotunnel.git
$ cd aiotunnel
$ pip install .

or, to skip cloning part

$ pip install git+https://github.com/codepr/aiotunnel.git@master#egg=aiotunnel

Changelog

See the CHANGES file.