Adds Electron2 Support

[technobly]

Feature

• Adds Electron2 platform: electron2
• Adds Quectel EG800Q_NA/EU support

Steps to Test

• DVOS release testing
• Dioptra Testing

References

• sc-132676

[avtolstoy]

How does this work for other platforms such as M SoM? BUFEN is not defined there.

[technobly]

I flipped the default for HAL_PLATFORM_CELLULAR_MODEM_VINT_INVERTED to be 1, and HAL_PLATFORM_CELLULAR_MODEM_VOLTAGE_TRANSLATOR to be 1, and made sure electron/hal_platform_config.h contains overrides to 0.

[avtolstoy]

@technobly This is still broken e.g. on M SoM:

  /home/avtolstoy/dev/device-os-2/modules/msom/system-part1/makefile /home/avtolstoy/dev/device-os-2/modules/msom/user-part/makefile
In file included from ./src/rtl872x/gsm0710muxer/platform.h:24,
                 from ../gsm0710muxer/gsm0710muxer/include/gsm0710muxer/muxer.h:25,
                 from ./src/rtl872x/gsm0710muxer/channel_stream.h:21,
                 from network/ncp_client/quectel/quectel_ncp_client.h:28,
                 from network/ncp_client/quectel/quectel_ncp_client.cpp:22:
network/ncp_client/quectel/quectel_ncp_client.cpp: In member function 'int particle::QuectelNcpClient::modemInit() const':
network/ncp_client/quectel/quectel_ncp_client.cpp:2027:30: error: 'BUFEN' was not declared in this scope
 2027 |     CHECK(hal_gpio_configure(BUFEN, &conf, nullptr));

None of the existing platforms that use Quectel NCP client have BUFEN. IMO HAL_PLATFORM_CELLULAR_MODEM_VOLTAGE_TRANSLATOR needs to be set by default to 0 to simplify things, and set to 1 for Boron, B SoM (both SARA) and Electron 2 (Quectel).

[technobly]

Added this commit. and checked that every platform compiles locally. I'll squash and rebase before merging.

[technobly]

Tested on HIL and all devices are passing ✅

[technobly]

Tested on HIL and all devices are passing ✅