Goose is a subset of Go equipped with a semantics in Coq, as well as translator to automatically convert Go programs written in Go to a model in Coq. The model plugs into Perennial for carrying out verification of concurrent storage systems.
Goose includes a reasonable subset of Go, enough to write serious concurrent programs. The translator and semantics are trusted; you can view the process as giving a semantics to Go. The semantics is given via a translation to GooseLang, an untyped lambda calculus with references and concurrency, including some special support to work for Go.
To give a flavor of what goose does, let's look at an example:
File append_log.go:
// Append-only, sequential, crash-safe log.
//
// The main interesting feature is that the log supports multi-block atomic
// appends, which are implemented by atomically updating an on-disk header with
// the number of valid blocks in the log.
package append_log
import (
"sync"
"github.com/tchajed/marshal"
"github.com/goose-lang/goose/machine/disk"
)
type Log struct {
m *sync.Mutex
sz uint64
diskSz uint64
}
func (log *Log) mkHdr() disk.Block {
enc := marshal.NewEnc(disk.BlockSize)
enc.PutInt(log.sz)
enc.PutInt(log.diskSz)
return enc.Finish()
}
func (log *Log) writeHdr() {
disk.Write(0, log.mkHdr())
}
func Open() *Log {
hdr := disk.Read(0)
dec := marshal.NewDec(hdr)
sz := dec.GetInt()
diskSz := dec.GetInt()
return &Log{m: new(sync.Mutex), sz: sz, diskSz: diskSz}
}Goose output:
(* autogenerated from append_log *)
From Perennial.goose_lang Require Import prelude.
From Perennial.goose_lang Require Import ffi.disk_prelude.
From Goose Require github_com.tchajed.marshal.
(* Append-only, sequential, crash-safe log.
The main interesting feature is that the log supports multi-block atomic
appends, which are implemented by atomically updating an on-disk header with
the number of valid blocks in the log. *)
Module Log.
Definition S := struct.decl [
"m" :: lockRefT;
"sz" :: uint64T;
"diskSz" :: uint64T
].
End Log.
Definition Log__mkHdr: val :=
rec: "Log__mkHdr" "log" :=
let: "enc" := marshal.NewEnc disk.BlockSize in
marshal.Enc__PutInt "enc" (struct.loadF Log.S "sz" "log");;
marshal.Enc__PutInt "enc" (struct.loadF Log.S "diskSz" "log");;
marshal.Enc__Finish "enc".
Definition Log__writeHdr: val :=
rec: "Log__writeHdr" "log" :=
disk.Write #0 (Log__mkHdr "log").
Definition Open: val :=
rec: "Open" <> :=
let: "hdr" := disk.Read #0 in
let: "dec" := marshal.NewDec "hdr" in
let: "sz" := marshal.Dec__GetInt "dec" in
let: "diskSz" := marshal.Dec__GetInt "dec" in
struct.new Log.S [
"m" ::= lock.new #();
"sz" ::= "sz";
"diskSz" ::= "diskSz"
].Goose doesn't support arbitrary Go code; it uses a carefully-selected subset of Go that is still idiomatic Go (for the most part) while being easy to translate. See the implementation design doc for more details.
There are three aspects of the Go model worth mentioning here:
- Assignments are not supported, only bindings. This imposes a "linearity" restriction where each variable is constant after being first defined, which aligns well with how Perennial code works. Mutable variables can still be emulated using pointers and heap allocation.
- Goose supports a few common control flow patterns so code can be written with early returns and some loops.
- Many operations are carefully modeled as being non-linearizable in Perennial, although this area is subtle and hard to reconcile with Go's documented memory model.
Goose solves the problem of using Perennial to verify runnable systems while ensuring some connection between the verification and the code. How else do verification projects get executable code?
Extraction is a popular approach, especially in Coq. Extraction is much like compilation in that Coq code is translated to OCaml or Haskell, relying on many similarities between the languages. (Side note: the reason it's called extraction is that it also does proof erasure, where proofs mixed into Coq code are removed so they don't have to be run.) To get side effects in extracted code the verification engineers write an interpreter in the target language that runs the verified part, using the power of the target language to interact with the outside world (eg, via the console, filesystem, or network stack).
A big disadvantage of extraction is performance. The source code is several steps away from the extracted code and interpreter. This distance makes it hard to debug performance problems and reduces developers' control over what the running code does.
Another approach is to use a deeply-embedded language that closely represents an efficient imperative language, such as C. Then one can write code directly in this language (eg, Cogent), produce it as part of proof-producing synthesis (eg, Fiat Cryptography), import it from normal source code (eg, clightgen for VST). Regardless of how the code in the language is produced, this approach requires a model of the syntax and semantics of the language at a fairly low-level, including modeled function calls, variable bindings, and local stacks, not to mention concurrency and side effects.
Directly modeling a low-level, imperative language (and especially writing in it) gives a great deal of control, which is good for performance. This approach is also well-suited to end-to-end verification: at first, one can pretty-print the imperative language and use any compiler, but eventually one can shift to a verified compiler and push the assumptions down the software stack.
Goose requires Go 1.12+.
You can install goose with either go get github.com/goose-lang/goose/cmd/goose or from a clone of this repo with go install ./cmd/goose. These install
the goose binary to $GOPATH/bin (or ~/go/bin if you don't have GOPATH
set).
To run goose on one of the internal examples and update the Coq output in
Perennial, run (for the append_log example):
goose -out $perennial/src/goose_lang/examples/append_log.v \
./internal/examples/append_log
where $perennial is the path to a clone of Perennial.
The bulk of goose is implemented in goose.go (which translates Go) and
glang/coq.go (which has structs to represent Coq and GooseLang code,
and code to convert these to strings).
Goose has integration tests that translate example code and compare against a
"gold" file in the repo. Changes to these gold files are hand-audited when
they are initially created, and then the test ensures that previously-working
code continues to translate correctly. To update the gold files after
modifying the tests or fixing goose, run go test -update-gold (and manually
review the diff before committing).
The tests include testdata/examples/unittest, a collection of small
examples intended for wide coverage, as well as some real programs in other
directories within testdata/examples.
The Coq output is separately tested by building it within the Perennial source tree.
Additionally, the testdata/examples/semantics package contains a set of
semantic tests for checking that translated programs preserve their semantic
meaning. The testing infrastructure requires test functions to have the form
func test*() bool and return true (that is, they begin with "test", take no
arguments, and return a bool expected to always be true). Any helper functions
should not follow this pattern.
The cmd/test_gen/main.go file generates the required test files from these
functions. The files are:
- A
.gofile which uses the Gotestingpackage. This is for confirming that tests actually do always return true, as intended. Note that the use of the testing package means that this file must end in_test.go. It should go in thesemantics/directory. - A
.vfile that runs using Perennial's semantic interpreter. This file should go in Perennial'sgoose_lang/interpreter/directory and can have any name.
To generate these files, the executable takes a required flag of either -go or
-coq which specifies the file type, an optional -out argument specifying
where to write the output, and finally the path to the semantics package. For
example, go run ./cmd/test_gen -coq -out ~/code/perennial/src/goose_lang/interpreter/generated_test.v ./testdata/examples/semantics generates the Coq file of semantics tests.
(You'll probably need to adjust the path to Perennial.) To re-generate the Go
test file you can just run go generate ./....
To run all the tests, first make sure you have submodules initialized (git submodule update --init --recursive).
Then run:
make ci
You can do make fix to automatically fix all the formatting and update generated files.
If the 'gold' files need updating, run go test -update-gold.