Fire Marshal Procedure

If you are not a Fire Marshal then follow the Fire Escape Procedure. If you are a Fire Marshal you should additionally follow this procedure.

ON HEARING THE FIRE ALARM:

• SWEEP ALL ROOMS TO ENSURE THAT THE FIRE IS NOT WITHIN THE SPACE AND TO MAKE SURE THAT EVERYBODY IS AWARE OF THE ALARM AND READY TO EXIT THE BUILDING.

• GO TO THE ALARM AND IDENTIFY WHICH ZONE THE ALARM HAS BEEN TRIGGERED FROM.

  • IF DOES LIVERPOOL AND YOU ARE SURE THERE IS NO FIRE THEN ATTEMPT TO IDENTIFY A CAUSE AND ONCE CONFIRMED THAT THE SPACE IS SAFE, CALL AN "ALL CLEAR" (VIA WHATSAPP).

• IF A FIRE HAS BEEN FOUND THEN ENSURE THAT THE FIRE SERVICE ARE CALLED BY DIALING 999

• GO TO THE MUSTER POINT TO CONFIRM THAT ALL PEOPLE WITHIN THE SPACE HAVE LEFT SAFELY. STAY THERE UNTIL YOU HEAR THE ALL CLEAR

TO RESET THE ALARM ONCE YOU HAVE CONFIRMED THAT ALL IS SAFE

FOLLOW THE INSTRUCTIONS THAT ARE NEXT TO THE ALARM, SPECIFICALLY:

• ENTER THE ALARM CODE (3112)

• PRESS "SILENCE ALARMS"

• ENTER THE ALARM CODE AGAIN (3112)

• PRESS "RESET"

• THE RESET WILL TAKE A NUMBER OF SECONDS DURING WHICH LIGHTS ON THE CONSOLE WILL FLASH